fbpx

BARLINEK ENGINEERED WOOD FLOORING

Barlinek Flooring it’s not a one but three layer of real wood arranged in a modern cross-construction. Layered floor construction ensures the stability of the floor and allows to restrain the forces of nature.  Its construction is ideal for underfloor heating.

Advantages of the Barlinek floor

  • 100% real sawn cut wood
  • Species: Sawn Cut European Oak, Ash
  • Ability to lay over radiant heating systems
  • Prefinished
  • A stable structure very resistant to changes in temperature and moisture
  • Fast and easy installation
  • A product ready for use immediately after installation
  • Possible to renovate many times
  • Possible to install on multiple levels of the home and office

naglowekmain2

100% OF WOOD

The Barlinek wood floors are a natural and beautiful product created from genuine wood. Wooden floors are healthier and more durable than any kind of synthetic imitation. Unlike laminates or other composite flooring, they are pleasantly warm to the touch, they do not electrify nor attract dust or mites. Therefore, they are a perfect solution for allergy sufferers. They provide perfect soundproofing, and thanks to their ability to absorb humidity they regulate microclimate of the room. Also, the Barlinek wooden floors can be sanded down and renovated with lacquer many times.

FOR UNDERFLOOR HEATING

Not every wood floor can be laid over underfloor heating. However, thanks to its layered cross structure, the Barlinek wood flooring conducts heat well and can be successfully applied on both electric and water floor heating. It is one of its advantages over solid wood floors. The Barlinek wood flooring can be installed over floor heating in two ways. It can be laid in a floating system or by gluing to the subfloor.

STABLE CONSTRUCTION

The Barlinek wood floors can be installed in three methods, (Floating. Glue Down or Nail) 1) a floating system, that is glueless click system 2) tongue-and-groove joints completely glued to your subfloor or 3) by securing the product into the subfloor using nails. In either method, It is a quick and simple method, that allows you or your flooring expert to install the floor quickly and professionally. The floor is also easy to be dismantled or re-installed. The Barlinek engineered wood flooring does not require any additional preservative treatment due to its highest quality factory-finishing with oils or lacquers. The floor is ready for use immediately after installation.

SURFACE LAYER – selected sawn cut European oak, ash or exotic wood, oiled or lacquered.

MIDDLE AND BOTTOM LAYER – structure made of coniferous wood.

QUICK INSTALLATION

The Barlinek wood floors can be installed in a floating system, that is glueless and based on modern tongue-and-groove joints. It is a quick and simple method, that allows you or your flooring expert to install the floor  quickly and professionally. The floor is also easy to be dismantled or re-installed. An alternative is to install the floor in a traditional way – by gluing the boards to the subfloor, which ensures stability of the installation even on large surfaces. The Barlinek engineered wood flooring does not require any additional preservative treatment due to its highest quality factory-finishing with oils or lacquers. The floor is ready for use immediately after installation.

MODERN JOINTS

Lay the floor yourself and enjoy it the very same day. 5Gc joint allow you to lay the floor without most of the tools which are usually necessary to install a floor. Crosslock is the latest joint designed by Barlinek, which facilitates the arranging of the Classic Fir Floor Pattern in a clean, quick and easy manner.

JOINT – 5GC BARLOCK SYSTEM:

  • fast – assembly is 25% faster
  • by yourself – a great weekend project for you or an expert
  • clean and comfortable – reduction of contamination risk during installation
  • safe – reduction of damage risk during installation or dismantling

JOINT – CROSSLOCK: 

  • a clean, quick, and easy assembly without using specialist tools
  • an arrangement system which does not require using both right and left woodblocks
  • no risk of damaging the joint during assembly.

PLANKS

Barlinek floor depending of the number of planks.

1-PLANK

1-plan of wood along the width of the board (similar appearance to solid wooden floors)

INTENSITY OF THE WOOD FEATURES OF BARLINEK FLOOR

A wooden floor is a natural product so each board has an unique appearance.

VERY LARGE QUANTITY

  • varied colour pattern,
  • small, medium and big size sound knots,
  • small, medium and big size knots, filled cracks,
  • sapwood,
  • flecking and mineral streaks,
  • distinct wood figure.

LARGE QUANTITY

  • varied colour pattern,
  • small, medium and big size sound knots,
  • small, medium and big size knots, filled cracks,
  • sapwood,
  • flecking and mineral streaks.

MODERATE QUANTITY

  • varied colour pattern,
  • small and medium size sound knots,
  • small and medium size knots, filled cracks,
  • edge sapwood,
  • flecking and mineral streaks.

VERY SMALL QUANTITY

  • varied colour pattern,
  • small and medium size sound knots,
  • small size filled cracks,
  • edge sapwood,
  • flecking and mineral streaks

DIMENSIONS

BIG SIZE 8″

1-plank boards of 8″ width and 86″ height.

GRANDE 7″

1-plank boards of 7″ width and 86″ height.

MEDIO 6″

1-plank boards of 6″ width and 70,5″ height.

HERRINGBONE 5″

1-plank boards of 5″ width and height 28,5″.

HERRINGBONE 4″

1-plank boards of 4″ width and 26″ height.

BIG SIZE 8″

1-strip boards of 8″ width and 86″ height.

GRANDE 7″

1-strip boards of 7″ width and 86″ height.

MEDIO 6″

1-strip boards of 6″ width and 70,5″ height.

HERRINGBONE 5″

1-strip boards of 5″ width and height 28,5″.

HERRINGBONE 4″

1-strip boards of 4″ width and 26″ height.