The floor is factory-finished and ready for use after installation. However, it is worth remembering that the top layer is 100% natural product made of wood. Water and sand are the biggest enemies of the floors.
1. Protective mats should be placed at entrances to your home. Protect your floor by using mats outside and/or inside all entrances. Mats will collect dirt, sand, pebbles, and other solid particles and will absorb moisture. Keep mats clean. Do not use latex or rubber-backed mats on hybrid flooring, as some compounds in these materials can permanently stain or damage the floor. Mats for installation on hybrid flooring should be labeled “non-staining.”
2. All furniture and other devices that come into contact with the floor should be equipped with protective pads, e.g. felt pads, which should be replaced regularly.
3. Armchairs and other furniture with hard plastic wheels should be used on plastic protective mats. If protective mats are not used, replace them with wheels designed for hard floors, type W.
4. Floors exposed to sunlight (UV light) will change their original color.
5. The floor is factory-finished and ready for use immediately after installation.
Floor care should only be carried out using products designed for this purpose. Hybrid floor care instructions can be found at www.barlinek.com.
6. When using the floor, the room temperature should be between +18°C and +24°C and the relative air humidity should be between 45% and 60%
autor:
w całej Polsce pracują montażyści certyfikowani przez Barlinek
